• Slut i Lager

Blyfri, No-Clean lödpasta Sn42/Bi58

SLDP-BI
Sn42/Bi58 av hög kvalitet, låg temperatur, No-Clean, blyfri (RoHs) lödpasta fylld i 10CC EFD-sprutor (med monteringshål inuti kolven) och redo att användas med I-Extruder dispenser.
16,89 €
Exkl. moms
Kvantitet
Slut i Lager

  2 års garanti

Vi erbjuder 2 års garanti för våra produkter.

  Säkra betalningar

Online-betalningar med SHA-256 SSL-kryptering.

  Återbetalningspolicy

30 dagars pengarna tillbaka-garanti.

  Fraktpolicy

Beställningar skickas inom 24-48 arbetstimmar.

Beskrivning
Sn42/Bi58 av hög kvalitet, låg temperatur, No-Clean, blyfri (RoHs) lödpasta fylld i 10CC EFD-sprutor (med monteringshål inuti kolven) och redo att användas med I-Extruder dispenser.

Mängd: 30 g (i 10CC EFD-spruta av Nordson-typ)

Kemisk sammansättning: Sn42/Bi58
Metallpartikelstorlek: 25-45 mikrometer (Typ 3)
Smältpunkt: 137°C (278°F)
Fluxtyp: No-Clean
Viskositet: 110 Pa·s (+-5)

Den låga viskositeten (~110 Pa·s) hos denna lödpasta är perfekt för felfri applicering även med små diameter nålar på små fotavtryck som: 0603, 0402, QFN...

Resterna av No-Clean-flussmedel är icke-korrosiva, icke-ledande och kan vara kvar på din kretskort. Alternativt kan de avlägsnas med ett lämpligt lösningsmedel som isopropylalkohol eller aceton.

Vad som också är viktigt är att den låga smältpunkten gör det möjligt att skydda känsliga komponenter som plastanslutningar, knappar, LED-lampor mot överhettning.

Produktdetaljer
SLDP-BI
381010
381010
Omdömen
Betyg 

Strong hold on circuit boards

I was unsure if this low temperature solder paste would do what I needed it to when I purchased it. I needed to apply solder paste on to small batch of PCB with 0603 SMT components. I had to play around with the heat gun a bit to get the temperature and airflow right, but once that was figured out, everything went perfectly. The product works well and I would highly recommend it.

Betyg 

Great low melt solder for reflow soldering

Perfect soldering paste for PCB prototyping with a temperature controlled hot air gun. Has a real low melting point, so you can get nice and shiny solid joints really easy and fast (I run mine at 169°C for a couple seconds), this prevents the board and any other components from being melted or desoldered and subsequently blasted off. Using this solder paste will also leave minimal if any flux residue and you won't have to worry about massive solder balls going everywhere or accidentally soldering two different chips together. With the I-Extruder dispenser, you can apply the perfect amount of solder paste. I would definitely recommend this combo: I-Extruder + low-temperature solder paste to anyone working in PCB prototyping or with electronics.

Betyg 

Works great

I have tested on a few PCBs with my new hot air workstation and it works well. Although I need more practice.

Betyg 

Flows nicely

Good solder paste. Flows and wicks well at moderate temperature.


Betyg 

Effective. Does the job.

I have been soldering with this solder paste paste for some time now. Any portable heat gun is able to reach 138℃. Works well for my needs.

Betyg 

Great performance!

This solder paste works very well with the i-Extruder dispenser. It was pretty simple to set up the dispenser, and this was a pretty good deal. It may still take skill to perfect dispensing, in my humble opinion. Regardless of what you do, it may take practice. Just watch how much is coming out and realize that for a tiny pad like you get for surface-mount components, you really don't need much. I'm using it with my inexpensive Yihua rework station and a very low fan setting, just as an aside.

Betyg 

worked wonderfully

Purchased this low temperature solder paste for an experiment, and it worked wonderfully for quick soldering of 2x20 pin headers onto a Raspberry Pi Zero 2W board. While I hadn't used solder paste and hot air before, I've been soldering with an iron and wire for decades. Absolutely impressed with this approach and considering adopting it for all my projects.



Betyg 

Works as directed

Works as directed. This solder paste worked with I-extruder as it was directed as so I’m very happy with it. Thank you very much.

Betyg 

Will definitely get more

Its my first time buying/using this low temperature solder paste, that probably explains the amount per price difference. Which Im cool with, I can imagine the amount of R&D for this stuff. I needed to solder but with minimal heat and this solder paste sure did the job quite well actually, so its definitely worth the price. Works perfectly well with I-extruder sispenser. Will definitely get more when I run out.

Skriv din recension

Blyfri, No-Clean lödpasta Sn42/Bi58

Blyfri, No-Clean lödpasta Sn42/Bi58

Sn42/Bi58 av hög kvalitet, låg temperatur, No-Clean, blyfri (RoHs) lödpasta fylld i 10CC EFD-sprutor (med monteringshål inuti kolven) och redo att användas med I-Extruder dispenser.
Skriv din recension