• Out-of-Stock

Sn42/Bi58 Lead-Free, No-Clean solder paste

SLDP-BI
Sn42/Bi58 high quality, low temperature, NO-Clean, Lead-Free (RoHs) solder paste filled into 10CC EFD syringes (with mounting hole inside the piston) and ready for the use with I-Extruder dispenser.
€16.89
Tax excluded
Quantity
Out-of-Stock

  2-year warranty

We offer a 2-year warranty for our products.

  Secure payments

SHA-256 SSL encrypted Online payments.

  Returns Policy

30 day money back guarantee.

  Shipping Policy

Orders are dispatched within 24-48 business hours.

Description
Sn42/Bi58 high quality, low temperature, NO-Clean, Lead-Free (RoHs) solder paste filled into 10CC EFD syringes (with mounting hole inside the piston) and ready for the use with I-Extruder dispenser.

Quantity: 30gr (in Nordson type 10CC EFD syringe)

Chemical composition: Sn42/Bi58
Metal Particle Size: 25-45 Microns (Type 3)
Melting Point: 137C (278F)
Flux type: NO-Clean
Viscosity: 110 Pa·s (+-5)

The low viscosity (~110 Pa·s) of that solder paste is perfect for flawless application of even with the small diameter needles, on small footprints such as: 0603, 0402, QFN...

The No-Clean flux residue is non-corrosive, non-conductive and can remain on your PCB. Alternatively, it can be removed with a suitable solvent such as isopropyl alcohol or acetone.

In addition, what is important, thanks to the low melting temperature, it allows you to protect sensitive components such as: plastic connectors, buttons, LEDs, against overheating.

Product Details
SLDP-BI
381010
381010
Reviews
Grade 

Strong hold on circuit boards

I was unsure if this low temperature solder paste would do what I needed it to when I purchased it. I needed to apply solder paste on to small batch of PCB with 0603 SMT components. I had to play around with the heat gun a bit to get the temperature and airflow right, but once that was figured out, everything went perfectly. The product works well and I would highly recommend it.

Grade 

Great low melt solder for reflow soldering

Perfect soldering paste for PCB prototyping with a temperature controlled hot air gun. Has a real low melting point, so you can get nice and shiny solid joints really easy and fast (I run mine at 169°C for a couple seconds), this prevents the board and any other components from being melted or desoldered and subsequently blasted off. Using this solder paste will also leave minimal if any flux residue and you won't have to worry about massive solder balls going everywhere or accidentally soldering two different chips together. With the I-Extruder dispenser, you can apply the perfect amount of solder paste. I would definitely recommend this combo: I-Extruder + low-temperature solder paste to anyone working in PCB prototyping or with electronics.

Grade 

Works great

I have tested on a few PCBs with my new hot air workstation and it works well. Although I need more practice.

Grade 

Flows nicely

Good solder paste. Flows and wicks well at moderate temperature.


Grade 

Effective. Does the job.

I have been soldering with this solder paste paste for some time now. Any portable heat gun is able to reach 138℃. Works well for my needs.

Grade 

Great performance!

This solder paste works very well with the i-Extruder dispenser. It was pretty simple to set up the dispenser, and this was a pretty good deal. It may still take skill to perfect dispensing, in my humble opinion. Regardless of what you do, it may take practice. Just watch how much is coming out and realize that for a tiny pad like you get for surface-mount components, you really don't need much. I'm using it with my inexpensive Yihua rework station and a very low fan setting, just as an aside.

Grade 

worked wonderfully

Purchased this low temperature solder paste for an experiment, and it worked wonderfully for quick soldering of 2x20 pin headers onto a Raspberry Pi Zero 2W board. While I hadn't used solder paste and hot air before, I've been soldering with an iron and wire for decades. Absolutely impressed with this approach and considering adopting it for all my projects.



Grade 

Works as directed

Works as directed. This solder paste worked with I-extruder as it was directed as so I’m very happy with it. Thank you very much.

Grade 

Will definitely get more

Its my first time buying/using this low temperature solder paste, that probably explains the amount per price difference. Which Im cool with, I can imagine the amount of R&D for this stuff. I needed to solder but with minimal heat and this solder paste sure did the job quite well actually, so its definitely worth the price. Works perfectly well with I-extruder sispenser. Will definitely get more when I run out.

Write your review

Sn42/Bi58 Lead-Free, No-Clean solder paste

Sn42/Bi58 Lead-Free, No-Clean solder paste

Sn42/Bi58 high quality, low temperature, NO-Clean, Lead-Free (RoHs) solder paste filled into 10CC EFD syringes (with mounting hole inside the piston) and ready for the use with I-Extruder dispenser.
Write your review