• Obecnie brak na stanie

Pasta lutownicza bez ołowiu Sn42/Bi58, No-Clean

SLDP-BI
Pasta lutownicza bez ołowiu Sn42/Bi58 wysokiej jakości, o niskiej temperaturze, bezczyszcząca, wypełniona w strzykawki EFD o pojemności 10CC (z otworem montażowym w tłoku) i gotowa do użycia z dozownikiem I-Extruder.
16,89 €
Netto
Ilość
Obecnie brak na stanie

  2-year warranty

We offer a 2-year warranty for our products.

  Secure payments

SHA-256 SSL encrypted Online payments.

  Returns Policy

30 day money back guarantee.

  Shipping Policy

Orders are dispatched within 24-48 business hours.

Opis
Pasta lutownicza bez ołowiu Sn42/Bi58 wysokiej jakości, o niskiej temperaturze, bezczyszcząca, wypełniona w strzykawki EFD o pojemności 10CC (z otworem montażowym w tłoku) i gotowa do użycia z dozownikiem I-Extruder.

Ilość: 30 g (w strzykawce EFD 10CC typu Nordson)

Skład chemiczny: Sn42/Bi58
Rozmiar cząstek metalu: 25-45 mikronów (Typ 3)
Temperatura topnienia: 137°C (278°F)
Typ fluksu: bezczyszczący
Lepkość: 110 Pa·s (+-5)

Niska lepkość (~110 Pa·s) tej pasty lutowniczej jest doskonała do bezbłędnego aplikowania nawet przy użyciu igieł o małej średnicy na małych śladach, takich jak: 0603, 0402, QFN...

Pozostałości po bezczyszczącym fluksośrodku są niekorodujące, nieprzewodzące i mogą pozostać na płycie PCB. Alternatywnie można je usunąć za pomocą odpowiedniego rozpuszczalnika, takiego jak alkohol izopropylowy lub aceton.

Co więcej, dzięki niskiej temperaturze topnienia umożliwia ochronę wrażliwych komponentów, takich jak: złącza plastikowe, przyciski, diody LED, przed przegrzaniem.

Szczegóły produktu
SLDP-BI
381010
381010
Opinie
Oceń 

Strong hold on circuit boards

I was unsure if this low temperature solder paste would do what I needed it to when I purchased it. I needed to apply solder paste on to small batch of PCB with 0603 SMT components. I had to play around with the heat gun a bit to get the temperature and airflow right, but once that was figured out, everything went perfectly. The product works well and I would highly recommend it.

Oceń 

Great low melt solder for reflow soldering

Perfect soldering paste for PCB prototyping with a temperature controlled hot air gun. Has a real low melting point, so you can get nice and shiny solid joints really easy and fast (I run mine at 169°C for a couple seconds), this prevents the board and any other components from being melted or desoldered and subsequently blasted off. Using this solder paste will also leave minimal if any flux residue and you won't have to worry about massive solder balls going everywhere or accidentally soldering two different chips together. With the I-Extruder dispenser, you can apply the perfect amount of solder paste. I would definitely recommend this combo: I-Extruder + low-temperature solder paste to anyone working in PCB prototyping or with electronics.

Oceń 

Works great

I have tested on a few PCBs with my new hot air workstation and it works well. Although I need more practice.

Oceń 

Flows nicely

Good solder paste. Flows and wicks well at moderate temperature.


Oceń 

Effective. Does the job.

I have been soldering with this solder paste paste for some time now. Any portable heat gun is able to reach 138℃. Works well for my needs.

Oceń 

Great performance!

This solder paste works very well with the i-Extruder dispenser. It was pretty simple to set up the dispenser, and this was a pretty good deal. It may still take skill to perfect dispensing, in my humble opinion. Regardless of what you do, it may take practice. Just watch how much is coming out and realize that for a tiny pad like you get for surface-mount components, you really don't need much. I'm using it with my inexpensive Yihua rework station and a very low fan setting, just as an aside.

Oceń 

worked wonderfully

Purchased this low temperature solder paste for an experiment, and it worked wonderfully for quick soldering of 2x20 pin headers onto a Raspberry Pi Zero 2W board. While I hadn't used solder paste and hot air before, I've been soldering with an iron and wire for decades. Absolutely impressed with this approach and considering adopting it for all my projects.



Oceń 

Works as directed

Works as directed. This solder paste worked with I-extruder as it was directed as so I’m very happy with it. Thank you very much.

Oceń 

Will definitely get more

Its my first time buying/using this low temperature solder paste, that probably explains the amount per price difference. Which Im cool with, I can imagine the amount of R&D for this stuff. I needed to solder but with minimal heat and this solder paste sure did the job quite well actually, so its definitely worth the price. Works perfectly well with I-extruder sispenser. Will definitely get more when I run out.

Napisz swoją opinię

Pasta lutownicza bez ołowiu Sn42/Bi58, No-Clean

Pasta lutownicza bez ołowiu Sn42/Bi58, No-Clean

Pasta lutownicza bez ołowiu Sn42/Bi58 wysokiej jakości, o niskiej temperaturze, bezczyszcząca, wypełniona w strzykawki EFD o pojemności 10CC (z otworem montażowym w tłoku) i gotowa do użycia z dozownikiem I-Extruder.
Napisz swoją opinię