• Rupture de stock

Pâte à souder sans plomb Sn42/Bi58, No-Clean

SLDP-BI
Pâte à souder sans plomb Sn42/Bi58 de haute qualité, à basse température, sans nettoyage, remplie dans des seringues EFD de 10CC (avec un trou de montage à l'intérieur du piston) et prête à être utilisée avec le distributeur I-Extruder.
16,89 €
HT
Quantité
Rupture de stock

  Garantie de 2 ans

Nous offrons une garantie de 2 ans pour nos produits.

  Paiement sécurisé

Paiements en ligne cryptés SSL SHA-256.

  Politique de retours

Garantie 30 jours satisfait ou remboursé.

  Politique de livraison

Les commandes sont expédiées sous 24-48h ouvrées.

Description
Pâte à souder sans plomb Sn42/Bi58 de haute qualité, à basse température, sans nettoyage, remplie dans des seringues EFD de 10CC (avec un trou de montage à l'intérieur du piston) et prête à être utilisée avec le distributeur I-Extruder.

Quantité : 30 g (dans une seringue EFD de type 10CC Nordson)

Composition chimique : Sn42/Bi58
Taille des particules métalliques : 25-45 microns (Type 3)
Point de fusion : 137°C (278°F)
Type de flux : sans nettoyage
Viscosité : 110 Pa·s (+-5)

La faible viscosité (~110 Pa·s) de cette pâte à souder est parfaite pour une application sans défaut même avec des aiguilles de petit diamètre, sur de petites empreintes telles que : 0603, 0402, QFN...

Le résidu de flux sans nettoyage est non corrosif, non conducteur et peut rester sur votre circuit imprimé. Alternativement, il peut être enlevé avec un solvant approprié tel que l'alcool isopropylique ou l'acétone.

De plus, ce qui est important, grâce à la basse température de fusion, cela vous permet de protéger les composants sensibles tels que : connecteurs en plastique, boutons, LED, contre la surchauffe.

Détails du produit
SLDP-BI
381010
381010
Avis
Note 

Strong hold on circuit boards

I was unsure if this low temperature solder paste would do what I needed it to when I purchased it. I needed to apply solder paste on to small batch of PCB with 0603 SMT components. I had to play around with the heat gun a bit to get the temperature and airflow right, but once that was figured out, everything went perfectly. The product works well and I would highly recommend it.

Note 

Great low melt solder for reflow soldering

Perfect soldering paste for PCB prototyping with a temperature controlled hot air gun. Has a real low melting point, so you can get nice and shiny solid joints really easy and fast (I run mine at 169°C for a couple seconds), this prevents the board and any other components from being melted or desoldered and subsequently blasted off. Using this solder paste will also leave minimal if any flux residue and you won't have to worry about massive solder balls going everywhere or accidentally soldering two different chips together. With the I-Extruder dispenser, you can apply the perfect amount of solder paste. I would definitely recommend this combo: I-Extruder + low-temperature solder paste to anyone working in PCB prototyping or with electronics.

Note 

Works great

I have tested on a few PCBs with my new hot air workstation and it works well. Although I need more practice.

Note 

Flows nicely

Good solder paste. Flows and wicks well at moderate temperature.


Note 

Effective. Does the job.

I have been soldering with this solder paste paste for some time now. Any portable heat gun is able to reach 138℃. Works well for my needs.

Note 

Great performance!

This solder paste works very well with the i-Extruder dispenser. It was pretty simple to set up the dispenser, and this was a pretty good deal. It may still take skill to perfect dispensing, in my humble opinion. Regardless of what you do, it may take practice. Just watch how much is coming out and realize that for a tiny pad like you get for surface-mount components, you really don't need much. I'm using it with my inexpensive Yihua rework station and a very low fan setting, just as an aside.

Note 

worked wonderfully

Purchased this low temperature solder paste for an experiment, and it worked wonderfully for quick soldering of 2x20 pin headers onto a Raspberry Pi Zero 2W board. While I hadn't used solder paste and hot air before, I've been soldering with an iron and wire for decades. Absolutely impressed with this approach and considering adopting it for all my projects.



Note 

Works as directed

Works as directed. This solder paste worked with I-extruder as it was directed as so I’m very happy with it. Thank you very much.

Note 

Will definitely get more

Its my first time buying/using this low temperature solder paste, that probably explains the amount per price difference. Which Im cool with, I can imagine the amount of R&D for this stuff. I needed to solder but with minimal heat and this solder paste sure did the job quite well actually, so its definitely worth the price. Works perfectly well with I-extruder sispenser. Will definitely get more when I run out.

Donnez votre avis

Pâte à souder sans plomb Sn42/Bi58, No-Clean

Pâte à souder sans plomb Sn42/Bi58, No-Clean

Pâte à souder sans plomb Sn42/Bi58 de haute qualité, à basse température, sans nettoyage, remplie dans des seringues EFD de 10CC (avec un trou de montage à l'intérieur du piston) et prête à être utilisée avec le distributeur I-Extruder.
Donnez votre avis