loading spinner
> >10cc black dispensing syringes

Information

Testimonials

i-Extruder is wonderful !
I backed the i-Extruder twice, once for the campaign that didn't make the goal, the second time for the one that DID make the goal. Since then, my i-Extruder has been sitting and waiting patiently for my projects to require it. That day was today.

I switched the type of flux I've been using (MG Chemicals liquid rosin flux) for Amtech NC-559-V2-TF Tacky Flux, recommended by Louis Rossmann in NYC, who uses it for board-level repairs on Apple motherboards. I love the stuff, but I got the big 30cc syringe, and it was just really unwieldy to use. So I pulled out the i-Extruder, filled a 10cc syringe and hooked everything up. It works perfectly, delivering just enough flux, then pulling back to keep more from oozing out. And since I do plan on getting into SMD components soon, it'll come in handy for solder paste application, too! (I have both hot air rework station AND a ReflowR programmable reflow plate, but haven't done enough SMD to really take advantage of them yet. But soon...)

This device is a real godsend, especially because I have difficulty with my hands due to a spinal injury. Squeezing the plunger on a syringe is possible, but painful, so this really helps me with my electronics work!

Thank you, and I hope you're having a lot of success! I just sang the praises of the i-Extruder to a worldwide mailing list of ham radio homebuilders and modders, so we'll see if they think so too and order some!
Gwen P., Jun 22, 2018
Should be nominated for Invention of the year
I-Extruder dispenser should be nominated for Invention of the year.
It's simply incredible - fully configurable dispenser and pick n' place tool packed into such small and lightweight device!
Greetings from Japan.
Shigeru, Dec 18, 2017
Good Good Good!!!
Beautiful product, sophisticated design, I recommend it for those who like me will use it for work.
Andrea Esposto, Dec 13, 2017
Perfect Product
I really love this new tool.
Got my I-Extruder via Kickstarter.
Thank you very much, I-Extruder team.
Pedro Ramon , Jul 12, 2017
The most useful tool for soldering
I-Extruder is the most useful tool for soldering. It's confortable to hold in the hand and dispenses solder easily. The best features are the XYZ stand and the foot pedal which free your hands to hold the board and the components. I definitely recommend it for your hobby projects.
Vesko Gavrilov, Jul 11, 2017
It is the best tool I have been waiting for
I am very happy to use I-Extruder with my electrical hobby life. Usability of I-Extruder is best than the other competing products.

Most strong point is that possible to supply small amount of solder onto small PAD. Furthermore、it is Small, light, stable, quiet, multi function, Reasonable price.

Thank you Artline team.
Satoshi, Jul 11, 2017
Very compact and we'll made
I have used other paste dispenser and suction tools, but this beats all of them in terms of compactness, ease of use and build quality. Very easy to set-up and become productive with it in a few minutes.
Tisham Dhar, Jul 11, 2017
Best machinerie to becommentariëren happy
Almost inmissible now already. How did we do it all years without this very small handy machine. I like the extruder very much, it is making working with my small smd components so much easier and more comfortabel. One of my best kickstarter bus!
Ronald Verkruisen , Jul 8, 2017
Best SMD tool on my bench.
The prospect of dabbing solder paste onto my boards with a toothpick was too much to bear, so I jumped at this Kickstarter.
Ten minutes playing with it and I was an old hand. Programming this thing is a breeze, and it feels solid in the hand with good ergonomics. I recommend the foot pedal. It allows you to lay down a really precise dab of paste right where you want it.
Solder paste placement is fast! You can do a small board in a few minutes with no mess at all. The pick and place lets you populate your board fast.
There is no downside with this product. It is quiet and feels good in the hand. There is no compressor noise since it uses a stepper motor for the drive.
This is the handiest SMD tool on my bench. If you are making your own boards then this is the must-have for your workplace, at home or on the job. Period.
Ron Ciren, Jul 8, 2017
Joy
What can i say, this tool beats my expectations. I have been using it for dispensing glue for fabricating acylic products, and it has completly revolutionalised the gluing process, no more pools of glue that suddenly happen when giving to much pressure to the syringe, which ruin the athetics of the finished product. No more reject products!!, YET :)
Dylan , Jul 8, 2017
View all
10cc black opaque dispensing syringes View larger
Previous Next

10cc black dispensing syringes

DSP-BL-SRG

New product

Pack of 5pcs black 10cc EFD dispensing syringes


More details

12,89 €

Pack of 5pcs black 10cc EFD syringes.

These black syringe barrels provide complete light blockage for light sensitive fluids and fully compatible with I-Extruder.

They have a mounting hole inside the piston and could be screwed onto dispenser's lead screw.
Also available in transparent plastic.

Content of pack:
5 x 10cc syringe barrels.
5 x double blade pistons
5 x luer lock front caps.
5 x back caps.

Write a review

"STANDARD" pack includes: 
1 x I-Extruder dispenser 
1 x 5V 2A USB power adapter EU or US plug (at your choice) 
5 x transparent 10cc Nordson type EFD syringes + front and back caps 
24 x various dispensing needles 
3 x various suction cups for SMD components placement 
1 x CNC machined aluminum piston for Pick & Place feature.

"ADVANCED" pack includes: 
1 x I-Extruder dispenser 
1 x 5V 2A USB power adapter EU or US plug (at your choice) 
5 x transparent 10cc Nordson type EFD syringes + front and back caps 
24 x various dispensing needles 
3 x various suction cups for SMD components placement 
1 x CNC machined aluminum piston for Pick & Place feature.
1 x Foot switch pedal (Great add-on if you do multiple PCBs)
1 x Aluminum Pick & Place pen with 60cm flexible silicone tube.
1 x 10cc (30gr) syringe of Sn42/Bi58 No Clean Solder paste

"DELUXE" pack includes: 
1 x I-Extruder dispenser 
1 x 5V 2A USB power adapter EU or US plug (at your choice) 
5 x transparent 10cc Nordson type EFD syringes + front and back caps 
24 x various dispensing needles 
3 x various suction cups for SMD components placement 
1 x CNC machined aluminum piston for Pick & Place feature.
1 x Foot switch pedal. 
1 x Aluminum Pick & Place pen with 60cm flexible silicone tube.
1 x XYZ adjustable aluminum stand (Perfect add-on for glues, greases and compounds dispensing in batches) 
1 x 10cc (30gr) syringe of Sn42/Bi57/Ag1 No Clean Solder paste (Containing 1% of silver) 

Customers who bought this product also bought: